contextual kerning in RB, MM?

frederik

euhm still this should work :)

according the ufo spec:

Any include() statements must be relative to the UFO path, not to the features.fea file itself.

see http://unifiedfontobject.org/versions/ufo3/features.fea/

your includes implies the fea file is one level up from the ufo.

jansindl3r

Okay I tested it outside of my font.
in one case it worked in the other it did not.
when using fontMake from cmd it exported correctly what couldn't be testInstalled from RoboFont. I am sending you the file

# did not work:
feature ss01 {
    include(../otherFea.fea);
} ss01;
#otherFea:
sub A by B;

# worked:

include(../otherFea.fea); 
#otherFea:
feature ss01 {
    sub A by B;
} ss01;

frederik

tested with a simple dummy font and it works fine...

could you send me such a UFO with fea code? thanks!

frederik

oh that is not good... a test install should be the same as generating a binary

jansindl3r

no problem, thanks for help on the way!

I came across an issue that RoboFont doesn't want to accept include command when test installing. I test install nearly every hour, so this was pretty important for me.

I didn't find anything out there that would flatten the files into one, so here is a small recursion

https://gist.github.com/jansindl3r/44deab6094f7423b1b19e3cecd221f23

gferreira

@jansindl3r that is a nice clean solution, thanks for sharing!

jansindl3r

That was pretty hard to do.. sometimes I am so blind to easier solutions. This works very well!
kern.fea generated by AFDKO
and contextualKern.fea done by hand

feature kern {
    include (kern.fea);
    include (contextualKern.fea);
} kern;

frederik

That is possible with fontTools feaLib. See https://fonttools.readthedocs.io/en/latest/feaLib/

jansindl3r

@gferreira thanks! I see that all the features are strings. It would be nice to have some sort of parser that creates classes or a dictionary out of it so I can just say features['kern'].append('blablabla')

As a first prototype this works well. It's a bit clumsy though. The SpaceCenter preview doesn't preview it, but it exports correctly and FeaturePreview extension shows it correctly as well.

import metricsMachine

font = metricsMachine.CurrentFont()
kernFea = font.kerning.compileFeatureText()

closer = '} kern;'
additions = [
    "pos V space' V -125"
    ]
additions = [' '*4+i+';' for i in additions]
additions = '\n'.join(additions)
kernFea = kernFea.replace(closer, f'{additions}\n{closer}')
font.features.text = kernFea

gferreira

hello @jansindl3r,

you could try converting the font’s kerning into kern feature code with MetricsMachine:

import metricsMachine
font = metricsMachine.CurrentFont()
kernFea = font.kerning.compileFeatureText()

…then add your triplets there, and add the kern feature to the font features.

good luck! let us know if it works

UNSOLVED contextual kerning in RB, MM?